MerCruiser Alpha One R/MR 59830A1 U-Joint Yoke Outdrive Upper 83-90 Stern Drive

****THIS IS A STOCK PHOTO YOU WILL RECEIVE A UNIT IN THE SAME CONDITION AS THE ONE PICTURED HERE****

Item Details & Compatibility

• This is a Yoke Assembly for alpha one R / MR / Alpha One Gen I (1983-1990)
• Also this would be compatible with 1971-1982 V8 305 / 350 Stern Drives that required the longer edition yoke (4cyl & 6cyl engines from that time 71'-82' used what was called a "short yoke")
• The yoke style was used in the years described above regardless of engine / gear ratio of outdrive.
  • I.E. 120hp 2.5L / 140hp 3.0L / 165hp 4.1L, 470 / 165hp 3.7L 4cyl / 4.3L V6 / 305 5.0L V8 / 350 5.0L V8 / also the very rare instances of alpha ones paired with 454's
    • However take special note of the yoke length as described below.
• The Yoke on this measures 9-9/16” (actual yoke part, you can see the full length in the picture)
• Make sure that yours measures the same as if you have an inline (4 or 6 cyl engine pre-1983) it is likely that your yoke is the short model that measures 8-1/8” These are not interchangeable.
• One other thing to take note is that MerCruiser added the extra o-ring around the middle of the yoke at some point in the late 80’s, however this shaft is still compatible in all of those systems as that o-ring was not imperative of function

Notable & Relevant Part Number(s)

• 59830A1 Yoke Assembly (2 O-Ring style)

Condition Notes

• Good Condition
• Freshwater Used Parts

Additional Details

• If you are unsure if this will work for you, please check with your motor's parts list or manual or just send us a message and we can quickly look this up for you or at least point you in the right direction. 
• Please Inspect Pictures closely to ensure satisfaction.
• Please Contact us if you have additional questions.
• Purchase with confidence!